Backup Module

How to

The module allows making tasks on the backup groups of devices (Cisco, HP, Huawei, MikroTik and e.t.c) with the set parameters. In order for the module to work it is necessary to make sure that it is installed and running in Settings


Vendor	MUPSBOX management via	Backup - send from Device to							Backup - get from Device via
	Telnet / SSH / API / Rest-API	SNMP Mng	TFTP / Diff	TFTP(MB) / Diff	FTP / Diff	SCP / Diff	SCP(MB) / Diff	SFTP / Diff	CLI Capture / Diff / Resend (ftp/sftp)	TFTP / Diff / Resend	FTP / Diff / Resend	SCP / Diff / Resend	SFTP / Diff / Resend
Cisco IOS	Yes / Yes / - / -	- / -	Yes / -	Yes / Yes	Yes / Yes	- / -	- / -	- / -	- / - / -	- / - / -	- / - / -	- / - / -	- / - / -
Cisco ASA	Yes / Yes / - / -	- / -	Yes / -	Yes / Yes	Yes / Yes	- / -	- / -	- / -	- / - / -	- / - / -	- / - / -	- / - / -	- / - / -
MikroTik ROSv6	Yes* / Yes* / Yes / -	- / -	- / -	- / -	Yes / Yes	- / -	- / -	Yes / Yes	- / - / -	- / - / -	Yes / Yes / Yes	- / - / -	Yes / Yes / Yes
MikroTik ROSv7	Yes* / Yes* / Yes / no	- / -	- / -	- / -	Yes / Yes	- / -	- / -	Yes / Yes	- / - / -	- / - / -	Yes / Yes / Yes	- / - / -	Yes / Yes / Yes
Juniper
Eltex
D-Link DES/DGS	Yes / Yes / - / -	- / -	Yes / -	Yes / ?	- / -	- / -	- / -	- / -	- / - / -	- / - / -	- / - / -	- / - / -	- / - / -

Mikrotik jobs

When you click on the Mikrotik jobs tab, you will see the following window:

There are 8 buttons on the Jobs tab:

- Add backup job
- Delete backup job
- Enable backup job
- Disable backup job
- Manual start backup job immediately
- Refresh list of backup jobs
- Save Backup Settings to file
- Restore Backup Settings from file

The filter box is available for find appropriate backup job:

Add backup job

In order for the program create backup on your routers, you must click on the , then the Edit job window will open:

Job name - name of the job
Source - select a group of routers from which we want create backup data
Destination - local or network place where backup copies will collected. First time Destination should be configured on Destination Tab
Backup mode - there are six modes: system backup, export compact, export verbose for ROSv6, Mupsbox settings backup, Dude DB and User Manager DB
Schedule - there are three schedule modes: manual, daily, monthly
Encryption - ecnryption string what new backup will be encrypted. For system backup only applied.
Export path - Export not all backup configuration, only part backup configuration what start header of part backup configuration. For export compact and export verbose only applied.

If daily or monthly schedule mode was chosen backup service will automaticaly start. Backup service should be started.

The Daily backup provides start backup day or days of week:

The Monthly backup provides start backup day of week:

The backup module can send email notification every time when a backup job was finished. For that action option "send an email notification after backup job" should be marked. If the recipient field will blank, a global notification email will be used instead.

The backup module can show differential information only for export compact and export verbose backup mode by email notification. At the same time, a full backup will save on an appropriate backup destination. Differential information will be marked by different colors. There are the next differential options:

Diff enable - enable a differential option for a backup job
Previous backup № - backup job compare information between current backup and appropriate № backup. For Example, if Previous backup # chosen 3 for a daily backup job, differential information between current backup and 3 days ago backup will be saved.
show all - send HTML file including all backup configuration by email notification.
miss first string - same as "show all". The first string will not include in a report.
difference - send HTML file differential backup configuration by email notification.
miss first string - same as "difference". The first string will not include in a report.

Retention option can be used by the backup module for deletion old backup copies and keep disk space of backup destination on the same level. The number of retention copies provides to save that number on backup destination. Other copies will delete by the next running backup job.

Open ports must be used if access to the router from ftp and sftp ports is prohibited in your firewall

Destination

The location that will keep backup copies should be configured on Destination tab.

There are 3 buttons on the Jobs tab:

- Add backup destination
- Delete backup destination
- Check connection to FTP destination

Add backup destination

For create new backup destination, you must click on the , then the Edit destination window will open:

Name - name of the backup destination
IP version - There is IP protocol communication to FTP or SFTP server. Be sure that IP V4 or IP V6 addresses applied in Device module.
Type of destination - There is destination can be ether to FTP/SFTP server (screenshot above) or to network folder (screenshot below).
Destination - local or network place where backup copies will collected. First time Destination should be configured on Destination Tab
FTP port - port of FTP server.
FTP subfolder - There is destination as subfolder of FTP server.
FTP host ip - ip address of FTP server.
FTP user - account to access to FTP server.
FTP password - password of account to access to FTP server.
Method - there is method of transfer protocol ether FTP of SFTP.
Port - number of port for FTP/SFTP connection.

There is destination as network folder have next fields:

Destination folder - the folder on network folder.
Net path - network path to network folder.
User - account to access to network folder.
Password - password of account to access to network folder.

Diff

For compare different configuration the software has Diff tab. The Diff tab split windows into two parts. There is the next feature:

Open backup file - the left file and/or right file.
Use the last number of backup - the feature on the left side.
Device - create and use to compare the current backup file. The feature on the right side.

The example of compare two configurations showed below:

Backup sync

Backup sync provides synchronize parts of configuration from the primary RouterOS device to slave RouterOS device on a regular period of time. This feature can create redundancy solution on RouterOS Devices.

For create new Backup sync, you must click on the , then the Backup sync window will open:

Job name - name of the backup sync job
Master router - select a RouterOS device that will send part of configuration to MupsBox Application.
Slave routers - select group of RouterOS devices that will recieve part of configuration from MupsBox Application.
Export path - part of configuration what will syncronyzed from Master to Slave RouterOS Devices via MupsBox Application.
FTP/SFTP - transfer protocol that will used for syncronization.
Period type - there are three schedule modes: monthly, daily, hours/minutes.
Description - Comment for current backup sync job.

Nix backup jobs

When you click on the Nix backup jobs tab, you will see the following window:

There are 6 buttons on the Jobs tab:

- Add backup job
- Delete backup job
- Enable backup job
- Disable backup job
- Manual start backup job immediately
- Refresh list of backup jobs

The filter box is available for find appropriate nix backup job:

Add Nix backup job

In order for the program create backup on your nix dervices, you must click on the , then the Edit job window will open:

Job name - name of the job
Host - your Nix device
Path - path to the folder you want to backup, starting with the root directory
Destination - local or network place where backup copies will collected. First time Destination should be configured on Destination Tab
Period type - there are four types: manual, daily, monthly,Hours/minutes
Server type - the method by which you will connect and take backup files.
Folder type - how to create folders for the backup.
Folders level backup - specify the depth of backup folders, 0 does not limit the depth.
Diff enable - enable a differential option for a Nix backup job
Diff typs - type of files to be compared; empty field means comparison of all files
Description - description in free interpretation

Cisco backup jobs

When you click on the Nix backup jobs tab, you will see the following window:

There are 6 buttons on the Jobs tab:

- Add backup job
- Delete backup job
- Enable backup job
- Disable backup job
- Manual start backup job immediately
- Refresh list of backup jobs

Notice: IOS 12.1 and below - can backup to ftp only if you use the standard port (21) in mupsbox settings.