MTMS (MikroTik Mobile Survey)

About MTMS

The survey covering the wireless AP on ROS, Single AP, CapsMan, Roaming between CAP, save a result for a plan and analyzing results.

Warning: To work with this program, you must have a certificate MTCWE. Recommend www.mikrotik-trainings.com

How to install

To install the program on the android, go to the PlayMarket and in the search box type MTMS.

Login in MTMS

Connect to - Enter the IP address of the Wi-Fi access point or СapsMan. Login - Login to RouterOS Password- Password to login to the device. pre 6.43 - If the RouterOS version is lower than 6.43 Save Conf - Saves entered data Connect - connect to AP or CapsMan Disconnect - disconnect from AP or CapsMan

Survey

Only works with access point

Client Side: SSID - what SSID client is connected to BSID - MAC address of the interface on the AP to which the client is connected MacAddress - Mac address of the client IPAddress - LinkSpeed - Tx Rate RSSI - Received Signal Strength Indicator (dBm) AP Side: AP Conf - AP configuration for this SSID Client MAC - Mac address of the client Client IP - IP address of the client RX/TX Rate - RX/TX Rate CCQ/SNR - CCQ and SNR RSSI - Received Signal Strength Indicator (dBm)

Below you can update once, put the calculation in 5 or 10 seconds, or put automatic data update. You can also save this data. In the top Name, the object and selecting points from A to P and from 1 to 17 you can save the data.

CapsMan

Only works with CapsMan

Client Side: SSID - what SSID client is connected to BSID - MAC address of the interface on the AP to which the client is connected MacAddress - Mac address of the client RSSI - Received Signal Strength Indicator (dBm) AP Side: CAP - CAP name in the CapsMan CH(Pw) - CAP configuration Client MAC - Mac address of the client RX/TX Rate - RX/TX Rate RSSI - Received Signal Strength Indicator (dBm) ()--->(-56)CAP_C1(-65)--->(-70)CAP_Office_2Ghz - Shows the client's transition from cap to cap Ping - Not working at the moment

Below you can update once, put the calculation in 5 or 10 seconds, or put automatic data update. You can also save this data. In the top Name the object and selecting points from A to P and from 1 to 17 you can save the data.

Scan

Scans wi-fi network and displays them. They can also be saved to the ini file.

Work with ini files

After you have saved the data, you can find it in the DocumentsMTMS>Object_name in your phone browser

Download any convenient way to a computer for further processing.

An example of what the recorded data looks like:

[General]
Object-Point=Object_1_A1
Data=7.4.2019

[CAPsMan Config]
Model=x86
CAP Interface=CAP_Office_2Ghz
Serial Number=
Version ROS=6.45.1 (stable)
Channel/(TxPower)=2412/20/gn(15dBm)

[Client Surv]
Model=MI 6
MAC=E4:46:DA:76:C0:3E
SSID="MTI-Group"
BSSID=64:d1:54:08:d7:4a
LinkRate=7Mbps
Rssi=-44dBm

[cAP Surv]
Client MAC=E4:46:DA:76:C0:3E
Channel/(TxPower)=2412/20/gn(15dBm)
RX/TX Rate=144.4Mbps-20MHz/2S/SGI/86.6Mbps-20MHz/2S/SGI
Rssi=-41dBm

[Rouming]
CAPs=()--->(-56)CAP_C1(-65)--->(-70)CAP_Office_2Ghz