Difference between revisions of "SysLOG"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
<h1>'''Syslog'''</h1> | <h1>'''Syslog'''</h1> | ||
<p>The module displays all the logs that were sent to the server on which the MupsBox program is running with the Syslog service installed and running.</p> | <p>The module displays all the logs that were sent to the server on which the MupsBox program is running with the Syslog service installed and running.</p> | ||
| − | [[File:syslog-module.png| | + | [[File:syslog-module.png|Syslog Module]] |
<p>In order for the module to work, you need to specify the IP address and port on which to receive logs from devices [[Install_and_Basic_Configuration#Syslog|Syslog]]. It is also necessary to install and run the service Syslog [[Install_and_Basic_Configuration#Install_and_Start_services|Install Service]]</p> | <p>In order for the module to work, you need to specify the IP address and port on which to receive logs from devices [[Install_and_Basic_Configuration#Syslog|Syslog]]. It is also necessary to install and run the service Syslog [[Install_and_Basic_Configuration#Install_and_Start_services|Install Service]]</p> | ||
<p>On the Router OS, you need to set the sending of logs to the server with the installed MupsBox program:</p> | <p>On the Router OS, you need to set the sending of logs to the server with the installed MupsBox program:</p> | ||
| + | [[File:syslog-ros-en1.png|Syslog on ROS]] | ||
| + | <p>In System → Logging, select Actions → remote in the Remote Address field, enter the server address with MupsBox, in the Remote Port field we set the port we specified in Settings → Syslog → Port Syslog Destination in MupsBox. | ||
| + | Next, on the router in System → Logging, select Rules:</p> | ||
| + | [[File:syslog-ros-en2.png|Syslog on ROS]] | ||
Revision as of 00:45, 28 June 2019
Syslog
The module displays all the logs that were sent to the server on which the MupsBox program is running with the Syslog service installed and running.
In order for the module to work, you need to specify the IP address and port on which to receive logs from devices Syslog. It is also necessary to install and run the service Syslog Install Service
On the Router OS, you need to set the sending of logs to the server with the installed MupsBox program:
In System → Logging, select Actions → remote in the Remote Address field, enter the server address with MupsBox, in the Remote Port field we set the port we specified in Settings → Syslog → Port Syslog Destination in MupsBox. Next, on the router in System → Logging, select Rules:
