Difference between revisions of "Device configuration for MupsBox"
| Line 9: | Line 9: | ||
'''BASIC CONFIG - SUMMARY STEPS''' | '''BASIC CONFIG - SUMMARY STEPS''' | ||
| − | 1. | + | 1. Router> '''enable''' |
| − | 2. | + | 2. Router# '''configure terminal''' |
3. Router(config)# '''interface gigabitethernet''' 0/0 | 3. Router(config)# '''interface gigabitethernet''' 0/0 | ||
Revision as of 01:03, 8 June 2021
Device Configuration
Introduction
This section is not a tutorial on configuration different manufacturers. Here you will find the minimum settings in the CLI (for access from MUPSBOX to devices).
Vendor Configuration
Cisco - IOS v15
Minimum configuration:
BASIC CONFIG - SUMMARY STEPS
1. Router> enable
2. Router# configure terminal
3. Router(config)# interface gigabitethernet 0/0
4. Router(config-if)# ip adress 10.9.90.201 255.255.255.0
5. Router(config-if)# no shutdown
6. Router(config-if)# exit
7. Router(config)# ip route 0.0.0.0 0.0.0.0 10.9.90.1
BASIC SSH CONFIG - SUMMARY STEPS
8. Router(config)# ip domain name domain.local
9. Router(config)# hostname MBRouter
10. MBRouter(config)# crypto key generate rsa modulus 1024
11. MBRouter(config)# username root privilege 15 secret PassW0rd
12. MBRouter(config)# aaa new-model
13. MBRouter(config)# line vty 0 4
14. MBRouter(config-line)# transport input ssh
MBRouter(config-line)# exit
ADDITIONAL CONFIG - SUMMARY STEPS
15. MBRouter(config)# enable secret PassW0rd
16. MBRouter(config)# service password-encryption
17. MBRouter(config)# end
18. MBRouter# copy running-config startup-config
| Comman or Action | Purpose | |
|---|---|---|
| Step 1 | enable
Example: Router> enable |
Enables privileged EXEC mode.
|
| Step 2 | configure terminal
Example: Router# configure terminal |
Enters global configuration mode. |
| Step 3 | interface gigabitethernet slot/port
Router(config)# interface gigabitethernet 0/0 |
Specify the port adapter type and the location of the interface to be configured. |
| Step 4 | ip address ip subnetmask
Example: Router(config-if)# ip address 10.9.90.201 255.255.255.0 |
|
| Step 5 | no shutdown
Example: Router(config-if)# no shutdown |
|
| Step 6 | exit
Example: Router(config-if)# exit |
|
| Step 7 | ip route 0.0.0.0 0.0.0.0 gateway
Example: Router(config)# ip route 0.0.0.0 0.0.0.0 10.9.90.1 |
| Comman or Action | Purpose | |
|---|---|---|
| Step 8 | ip domain name domain name
Example: Router(config)# ip domain name domain.local |
Enables privileged EXEC mode.
|
| Step 9 | hostname newhostname
Router(config)# hostname MBRouter |
Enters global configuration mode. |
| Step 10 | crypto key generate rsa modulus 1024
MBRouter(config)# crypto key generate rsa modulus 1024 |
|
| Step 11 | username root privilege 15 secret PassW0rd
Example: MBRouter(config)# username root privilege 15 secret PassW0rd |
|
| Step 12 | aaa new-model
Example: MBRouter(config)# aaa new-model |
|
| Step 13 | line vty 0 4
Example: MBRouter(config)# line vty 0 4 |
|
| Step 14 | transport input ssh
MBRouter(config-line)# transport input ssh MBRouter(config-line)# exit |
| Comman or Action | Purpose | |
|---|---|---|
| Step 15 | enable secret PassW0rd
Example: MBRouter(config)# enable secret PassW0rd |
Enables privileged EXEC mode.
|
| Step 16 | service password-encryption
MBRouter(config)# service password-encryption |
Enters global configuration mode. |
| Step 17 | end
MBRouter(config)# end |
|
| Step 18 | copy running-config startup-config
MBrouter# copy running-config startup-config |
MupsBox will sort the data and display only the values found. These data can be exported to Excel for further processing.
Cisco - IOS L2 v15
To search for data by given dates and times, check the boxes next to them and select the date and time you are interested in:
Cisco - IOS L2 v12
To filter by prefix, click the down arrow in the prefix field, as shown in the figure below and select the prefix or prefixes by which you need to filter the data.
To filter by device and topic, do the same.
Cisco - ASA
For more flexible filtering, use a custom filter.
