Difference between revisions of "Device configuration for MupsBox"
| Line 7: | Line 7: | ||
<h3>'''Cisco - IOS v15'''</h3>Minimum configuration: | <h3>'''Cisco - IOS v15'''</h3>Minimum configuration: | ||
| − | '''SUMMARY STEPS''' | + | '''BASIC CONFIG - SUMMARY STEPS''' |
1. '''enable''' | 1. '''enable''' | ||
| Line 14: | Line 14: | ||
{| class="wikitable" | {| class="wikitable" | ||
| − | |+DETAILED STEPS | + | |+BASIC CONFIG - DETAILED STEPS |
! | ! | ||
!Comman or Action | !Comman or Action | ||
| Line 21: | Line 21: | ||
|'''Step 1''' | |'''Step 1''' | ||
|'''enable''' | |'''enable''' | ||
| + | |||
| Line 32: | Line 33: | ||
|'''Step 2''' | |'''Step 2''' | ||
|'''configure terminal''' | |'''configure terminal''' | ||
| + | |||
| Line 41: | Line 43: | ||
|'''Step 3''' | |'''Step 3''' | ||
|'''interface gigabitethernet''' ''slot/port'' | |'''interface gigabitethernet''' ''slot/port'' | ||
| + | |||
| + | |||
| + | '''Example:''' | ||
| + | |||
| + | Router(config)# interface gigabitethernet 0/0 | ||
|Specify the port adapter type and the location of the interface to be configured. | |Specify the port adapter type and the location of the interface to be configured. | ||
|- | |- | ||
|'''Step 4''' | |'''Step 4''' | ||
|'''ip address''' ''ip subnetmask'' | |'''ip address''' ''ip subnetmask'' | ||
| + | |||
| Line 54: | Line 62: | ||
|'''Step 5''' | |'''Step 5''' | ||
|'''no shutdown''' | |'''no shutdown''' | ||
| + | |||
| Line 61: | Line 70: | ||
| | | | ||
|- | |- | ||
| + | |'''Step 6''' | ||
| + | |'''exit''' | ||
| + | |||
| + | |||
| + | '''Example:''' | ||
| + | |||
| + | Router(config-if)# exit | ||
| | | | ||
| + | |- | ||
| + | |'''Step 7''' | ||
| + | |'''ip route 0.0.0.0 0.0.0.0''' ''gateway'' | ||
| + | |||
| + | |||
| + | '''Example:''' | ||
| + | |||
| + | Router(config)# ip route 0.0.0.0 0.0.0.0 10.9.90.1 | ||
| + | | | ||
| + | |- | ||
| + | |'''Step 8''' | ||
| + | |'''ip domain name''' ''domain name'' | ||
| + | |||
| + | |||
| + | '''Example:''' | ||
| + | |||
| + | Router(config)# ip domain name domain.local | ||
| + | | | ||
| + | |- | ||
| + | |'''Step 9''' | ||
| + | |'''hostname''' ''newhostname'' | ||
| + | |||
| + | |||
| + | '''Example:''' | ||
| + | |||
| + | Router(config)# hostname MBRouter | ||
| + | | | ||
| + | |- | ||
| + | |'''Step 10''' | ||
| | | | ||
| | | | ||
| Line 81: | Line 126: | ||
font-size:8pt; font-face:verdana,sans-serif; border:0.2em outset #ceebf7; | font-size:8pt; font-face:verdana,sans-serif; border:0.2em outset #ceebf7; | ||
padding:0.1em; font-weight:bolder; -moz-border-radius:8px; "> | padding:0.1em; font-weight:bolder; -moz-border-radius:8px; "> | ||
| − | [[#top| Back to the Top ]]</span></div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div> | + | [[#top| Back to the Top ]]</span></div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div> |
Revision as of 23:48, 7 June 2021
Device Configuration
Introduction
This section is not a tutorial on configuration different manufacturers. Here you will find the minimum settings in the CLI (for access from MUPSBOX to devices).
Vendor Configuration
Cisco - IOS v15
Minimum configuration:
BASIC CONFIG - SUMMARY STEPS
1. enable
2. configure terminal
| Comman or Action | Purpose | |
|---|---|---|
| Step 1 | enable
Example: Router> enable |
Enables privileged EXEC mode.
|
| Step 2 | configure terminal
Example: Router# configure terminal |
Enters global configuration mode. |
| Step 3 | interface gigabitethernet slot/port
Router(config)# interface gigabitethernet 0/0 |
Specify the port adapter type and the location of the interface to be configured. |
| Step 4 | ip address ip subnetmask
Example: Router(config-if)# ip address 10.9.90.201 255.255.255.0 |
|
| Step 5 | no shutdown
Example: Router(config-if)# no shutdown |
|
| Step 6 | exit
Router(config-if)# exit |
|
| Step 7 | ip route 0.0.0.0 0.0.0.0 gateway
Router(config)# ip route 0.0.0.0 0.0.0.0 10.9.90.1 |
|
| Step 8 | ip domain name domain name
Router(config)# ip domain name domain.local |
|
| Step 9 | hostname newhostname
Router(config)# hostname MBRouter |
|
| Step 10 |
MupsBox will sort the data and display only the values found. These data can be exported to Excel for further processing.
Cisco - IOS L2 v15
To search for data by given dates and times, check the boxes next to them and select the date and time you are interested in:
Cisco - IOS L2 v12
To filter by prefix, click the down arrow in the prefix field, as shown in the figure below and select the prefix or prefixes by which you need to filter the data.
To filter by device and topic, do the same.
Cisco - ASA
For more flexible filtering, use a custom filter.
