Revision as of 23:31, 7 June 2021

Device Configuration

Introduction

This section is not a tutorial on configuration different manufacturers. Here you will find the minimum settings in the CLI (for access from MUPSBOX to devices).

Vendor Configuration

Cisco - IOS v15

Copying an Image from Flash Memory to an FTP Server

To copy a system image to an FTP network server, complete the tasks in this section:

SUMMARY STEPS

1. enable

2. configure terminal

DETAILED STEPS
	Comman or Action	Purpose
Step 1	enable Example: Router> enable	Enables privileged EXEC mode. Enter your password if prompted.
Step 2	configure terminal Example: Router# configure terminal	Enters global configuration mode.
Step 3	interface gigabitethernet slot/port	Specify the port adapter type and the location of the interface to be configured.
Step 4	ip address ip subnetmask Example: Router(config-if)# ip address 10.9.90.201 255.255.255.0
Step 5	no shutdown Example: Router(config-if)# no shutdown

MupsBox will sort the data and display only the values found. These data can be exported to Excel for further processing.

Cisco - IOS L2 v15

To search for data by given dates and times, check the boxes next to them and select the date and time you are interested in:

Cisco - IOS L2 v12

To filter by prefix, click the down arrow in the prefix field, as shown in the figure below and select the prefix or prefixes by which you need to filter the data.

To filter by device and topic, do the same.

Cisco - ASA

For more flexible filtering, use a custom filter.

Back to the Top

MediaWiki Appliance - Powered by TurnKey Linux

@@ Line 6: / Line 6: @@
 <h2>'''Vendor Configuration'''</h2>
 <h3>'''Cisco - IOS v15'''</h3>
-<p>If you need to find a log line by keyword, type it in the search field:</p>
-[[File:syslog-search.png|Syslog Search]]
+=== Copying an Image from Flash Memory to an FTP Server ===
+To copy a system image to an FTP network server, complete the tasks in this section:
+'''SUMMARY STEPS'''
+.    '''enable'''
+.    '''configure terminal'''
+{| class="wikitable"
+|+DETAILED STEPS
+!
+!Comman or Action
+!Purpose
+|-
+|'''Step 1'''
+|'''enable'''
+'''Example:'''
+Router> enable
+|Enables privileged EXEC mode.
+* Enter your password if prompted.
+|-
+|'''Step 2'''
+|'''configure terminal'''
+'''Example:'''
+Router# configure terminal
+|Enters global configuration mode.
+|-
+|'''Step 3'''
+|'''interface gigabitethernet''' ''slot/port''
+|Specify the port adapter type and the location of the interface to be configured.
+|-
+|'''Step 4'''
+|'''ip address''' ''ip subnetmask''
+'''Example:'''
+Router(config-if)# ip address 10.9.90.201 255.255.255.0
+|
+|-
+|'''Step 5'''
+|'''no shutdown'''
+'''Example:'''
+Router(config-if)# no shutdown
+|
+|-
+|
+|
+|
+|}
 <p>MupsBox will sort the data and display only the values found. These data can be exported to Excel for further processing.</p>
 <h3>'''Cisco - IOS L2 v15'''</h3>
@@ Line 24: / Line 84: @@
   font-size:8pt; font-face:verdana,sans-serif;  border:0.2em outset #ceebf7;
   padding:0.1em; font-weight:bolder; -moz-border-radius:8px; ">
-[[#top| Back to the Top ]]</span></div>
+[[#top| Back to the Top ]]</span></div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div>

Difference between revisions of "Device configuration for MupsBox"