Difference between revisions of "MTMS (MikroTik Mobile Survey)"

From Mupssoft Wiki
Jump to navigation Jump to search
(Created page with "<h1>'''About MTMS'''</h1> <p>Survey covering the wireless AP on ROS , Single AP, CapsMan, Roaming between CAP, save result for plan and analyzing results.</p><br> <h1>'''How t...")
 
 
(19 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 
<h1>'''About MTMS'''</h1>
 
<h1>'''About MTMS'''</h1>
−
<p>Survey covering the wireless AP on ROS , Single AP, CapsMan, Roaming between CAP, save result for plan and analyzing results.</p><br>
+
<p>The survey covering the wireless AP on ROS, Single AP, CapsMan, Roaming between CAP, save a result for a plan and analyzing results.</p>
 +
<div id="shbox" style=" border-width:1px; border-color:lightgrey; padding: 2px 5px 2px 10px; min-height:56px; border-style:solid; font-size: 0.9em;">
 +
[[File:Icon-warn.png|left|56px|56px]]
 +
<p style="margin-top:10px; margin-left: 56px;"><b style="color:red;">Warning:</b> To work with this program, you must have a certificate MTCWE. Recommend '''[https://www.mikrotik-trainings.com www.mikrotik-trainings.com]'''</p></div>
 
<h1>'''How to install'''</h1>
 
<h1>'''How to install'''</h1>
−
<p>To install the program on the android, go to the PlayMarket and in the search box type MTMS.</p><br>
+
<p>To install the program on the android, go to the [https://play.google.com/store/apps/details?id=com.mupssoft.MTMS PlayMarket] and in the search box type MTMS.</p><br>
 +
<h1>'''Login in MTMS'''</h1>
 +
{|style="width:700px"
 +
|[[File:MTMS-login.png|border|200px|MTMS]]
 +
|<ul>
 +
<li>Connect to - Enter the IP address of the Wi-Fi access point or СapsMan.</li>
 +
<li>Login - Login to RouterOS</li>
 +
<li>Password- Password to login to the device.</li>
 +
<li>pre 6.43 - If the RouterOS version is lower than 6.43</li>
 +
<li>Save Conf - Saves entered data</li>
 +
<li>Connect - connect to AP or CapsMan</li>
 +
<li>Disconnect - disconnect from AP or CapsMan</li>
 +
</ul>
 +
|}
 +
<h1>'''Survey'''</h1>
 +
<p> Only works with access point </p>
 +
{|style="width:700px"
 +
|[[File:MTMS-survey.png|border|200px|MTMS]]
 +
|Client Side:
 +
<ul>
 +
<li>SSID - what SSID client is connected to</li>
 +
<li>BSID - MAC address of the interface on the AP to which the client is connected</li>
 +
<li>MacAddress - Mac address of the client</li>
 +
<li>IPAddress - </li>
 +
<li>LinkSpeed - Tx Rate</li>
 +
<li>RSSI - Received Signal Strength Indicator (dBm)</li>
 +
</ul>
 +
AP Side:
 +
<ul>
 +
<li>AP Conf - AP configuration for this SSID</li>
 +
<li>Client MAC - Mac address of the client</li>
 +
<li>Client IP - IP address of the client</li>
 +
<li>RX/TX Rate - RX/TX Rate</li>
 +
<li>CCQ/SNR - CCQ and SNR</li>
 +
<li>RSSI - Received Signal Strength Indicator (dBm)</li>
 +
</ul>
 +
|}
 +
<p>Below you can update once, put the calculation in 5 or 10 seconds, or put automatic data update. You can also save this data. In the top Name, the object and selecting points from A to P and from 1 to 17 you can save the data.</p>
 +
<h1>'''CapsMan'''</h1>
 +
<p> Only works with CapsMan </p>
 +
{|style="width:900px"
 +
|[[File:MTMS-Caps.png|border|200px|MTMS]]
 +
|Client Side:
 +
<ul>
 +
<li>SSID - what SSID client is connected to</li>
 +
<li>BSID - MAC address of the interface on the AP to which the client is connected</li>
 +
<li>MacAddress - Mac address of the client</li>
 +
<li>RSSI - Received Signal Strength Indicator (dBm)</li>
 +
</ul>
 +
AP Side:
 +
<ul>
 +
<li>CAP - CAP name in the CapsMan</li>
 +
<li>CH(Pw) - CAP configuration</li>
 +
<li>Client MAC - Mac address of the client</li>
 +
<li>RX/TX Rate - RX/TX Rate</li>
 +
<li>RSSI - Received Signal Strength Indicator (dBm)</li>
 +
<li>()--->(-56)CAP_C1(-65)--->(-70)CAP_Office_2Ghz - Shows the client's transition from cap to cap</li>
 +
<li>Ping - Not working at the moment</li>
 +
</ul>
 +
|}
 +
<p>Below you can update once, put the calculation in 5 or 10 seconds, or put automatic data update. You can also save this data. In the top Name the object and selecting points from A to P and from 1 to 17 you can save the data.</p>
 +
<h1>'''Scan'''</h1>
 +
{|style="width:700px"
 +
|[[File:MTMS-scan.png|border|200px|MTMS]]
 +
|Scans wi-fi network and displays them. <br>They can also be saved to the ini file.
 +
|}
 +
<h1>'''Work with ini files'''</h1>
 +
<p>After you have saved the data, you can find it in the DocumentsMTMS>Object_name in your phone browser</p>
 +
<p>Download any convenient way to a computer for further processing.</p>
 +
<p>An example of what the recorded data looks like:</p>
 +
<p>[General]<br>
 +
Object-Point=Object_1_A1<br>
 +
Data=7.4.2019<br>
 +
<br>
 +
[CAPsMan Config]<br>
 +
Model=x86<br>
 +
CAP Interface=CAP_Office_2Ghz<br>
 +
Serial Number=<br>
 +
Version ROS=6.45.1 (stable)<br>
 +
Channel/(TxPower)=2412/20/gn(15dBm)<br>
 +
<br>
 +
[Client Surv]<br>
 +
Model=MI 6<br>
 +
MAC=E4:46:DA:76:C0:3E<br>
 +
SSID="MTI-Group"<br>
 +
BSSID=64:d1:54:08:d7:4a<br>
 +
LinkRate=7Mbps<br>
 +
Rssi=-44dBm<br>
 +
<br>
 +
[cAP Surv]<br>
 +
Client MAC=E4:46:DA:76:C0:3E<br>
 +
Channel/(TxPower)=2412/20/gn(15dBm)<br>
 +
RX/TX Rate=144.4Mbps-20MHz/2S/SGI/86.6Mbps-20MHz/2S/SGI<br>
 +
Rssi=-41dBm<br>
 +
<br>
 +
[Rouming]<br>
 +
CAPs=()--->(-56)CAP_C1(-65)--->(-70)CAP_Office_2Ghz<br></p>
 +
 
 +
<div id="BackToTop"  class="noprint" style="background-color:#DDEFDD; position:fixed;
 +
bottom:32px; left:2%; z-index:9999; padding:0; margin:0;"><span style="color:blue;
 +
font-size:8pt; font-face:verdana,sans-serif;  border:0.2em outset #ceebf7;
 +
padding:0.1em; font-weight:bolder; -moz-border-radius:8px; ">
 +
[[#top| Back to the Top ]]</span></div>

Latest revision as of 02:15, 22 July 2019

About MTMS

The survey covering the wireless AP on ROS, Single AP, CapsMan, Roaming between CAP, save a result for a plan and analyzing results.

Icon-warn.png

Warning: To work with this program, you must have a certificate MTCWE. Recommend www.mikrotik-trainings.com

How to install

To install the program on the android, go to the PlayMarket and in the search box type MTMS.


Login in MTMS

MTMS
  • Connect to - Enter the IP address of the Wi-Fi access point or СapsMan.
  • Login - Login to RouterOS
  • Password- Password to login to the device.
  • pre 6.43 - If the RouterOS version is lower than 6.43
  • Save Conf - Saves entered data
  • Connect - connect to AP or CapsMan
  • Disconnect - disconnect from AP or CapsMan

Survey

Only works with access point

MTMS Client Side:
  • SSID - what SSID client is connected to
  • BSID - MAC address of the interface on the AP to which the client is connected
  • MacAddress - Mac address of the client
  • IPAddress -
  • LinkSpeed - Tx Rate
  • RSSI - Received Signal Strength Indicator (dBm)

AP Side:

  • AP Conf - AP configuration for this SSID
  • Client MAC - Mac address of the client
  • Client IP - IP address of the client
  • RX/TX Rate - RX/TX Rate
  • CCQ/SNR - CCQ and SNR
  • RSSI - Received Signal Strength Indicator (dBm)

Below you can update once, put the calculation in 5 or 10 seconds, or put automatic data update. You can also save this data. In the top Name, the object and selecting points from A to P and from 1 to 17 you can save the data.

CapsMan

Only works with CapsMan

MTMS Client Side:
  • SSID - what SSID client is connected to
  • BSID - MAC address of the interface on the AP to which the client is connected
  • MacAddress - Mac address of the client
  • RSSI - Received Signal Strength Indicator (dBm)

AP Side:

  • CAP - CAP name in the CapsMan
  • CH(Pw) - CAP configuration
  • Client MAC - Mac address of the client
  • RX/TX Rate - RX/TX Rate
  • RSSI - Received Signal Strength Indicator (dBm)
  • ()--->(-56)CAP_C1(-65)--->(-70)CAP_Office_2Ghz - Shows the client's transition from cap to cap
  • Ping - Not working at the moment

Below you can update once, put the calculation in 5 or 10 seconds, or put automatic data update. You can also save this data. In the top Name the object and selecting points from A to P and from 1 to 17 you can save the data.

Scan

MTMS Scans wi-fi network and displays them.
They can also be saved to the ini file.

Work with ini files

After you have saved the data, you can find it in the DocumentsMTMS>Object_name in your phone browser

Download any convenient way to a computer for further processing.

An example of what the recorded data looks like:

[General]
Object-Point=Object_1_A1
Data=7.4.2019

[CAPsMan Config]
Model=x86
CAP Interface=CAP_Office_2Ghz
Serial Number=
Version ROS=6.45.1 (stable)
Channel/(TxPower)=2412/20/gn(15dBm)

[Client Surv]
Model=MI 6
MAC=E4:46:DA:76:C0:3E
SSID="MTI-Group"
BSSID=64:d1:54:08:d7:4a
LinkRate=7Mbps
Rssi=-44dBm

[cAP Surv]
Client MAC=E4:46:DA:76:C0:3E
Channel/(TxPower)=2412/20/gn(15dBm)
RX/TX Rate=144.4Mbps-20MHz/2S/SGI/86.6Mbps-20MHz/2S/SGI
Rssi=-41dBm

[Rouming]
CAPs=()--->(-56)CAP_C1(-65)--->(-70)CAP_Office_2Ghz

Retrieved from "https://wiki.mupssoft.com/index.php?title=MTMS_(MikroTik_Mobile_Survey)&oldid=618"