MTMS (MikroTik Mobile Survey)

About MTMS

Survey covering the wireless AP on ROS , Single AP, CapsMan, Roaming between CAP, save result for plan and analyzing results.

How to install

To install the program on the android, go to the PlayMarket and in the search box type MTMS.

Login in MTMS

Connect to - Enter the IP address of the Wi-Fi access point or СapsMan. Login - Login to RouterOS Password- Password to login to device. pre 6.43 - If the RouterOS version is lower than 6.43 Save Conf - Saves entered data Connect - connect to AP or CapsMan Disconnect - disconnect from AP or CapsMan

Survey

Only works with access point

Client Side: SSID - what SSID client is connected to BSID - MAC address of the interface on the AP to which the client is connected MacAddress - Mac address of the client IPAddress - LinkSpeed - Tx Rate RSSI - TX Signal Strength (dBm) AP Side: AP Conf - AP configuration for this SSID Client MAC - Mac address of the client Client IP - IP address of the client RX/TX Rate - RX/TX Rate CCQ/SNR - CCQ and SNR RSSI - RX Signal Strength (dBm)

Below you can update once, put the calculation in 5 or 10 seconds, or put automatic data update. You can also save this data. In the top Name the object and selecting points from A to P and from 1 to 17 you can save the data.

CapsMan

Only works with CapsMan

Client Side: SSID - what SSID client is connected to BSID - MAC address of the interface on the AP to which the client is connected MacAddress - Mac address of the client RSSI - Received Signal Strength Indicator (dBm) AP Side: CAP - CAP name in the CapsMan CH(Pw) - CAP configuration Client MAC - Mac address of the client RX/TX Rate - RX/TX Rate RSSI - Received Signal Strength Indicator (dBm) ()--->(-56)CAP_C1(-65)--->(-70)CAP_Office_2Ghz - Shows the client's transition from cap to cap Ping - Not working at the moment

Below you can update once, put the calculation in 5 or 10 seconds, or put automatic data update. You can also save this data. In the top Name the object and selecting points from A to P and from 1 to 17 you can save the data.

Scan

Scans wi-fi network and displays them. They can also be saved to the ini file.

Work with ini files

After you have saved the data, you can find it in the DocumentsMTMS>Object_name in your phone browser

Download any convenient way to a computer for further processing.

An example of what the recorded data looks like:

[General]
Object-Point=Object_1_A1
Data=7.4.2019

[CAPsMan Config]
Model=x86
CAP Interface=CAP_Office_2Ghz
Serial Number=
Version ROS=6.45.1 (stable)
Channel/(TxPower)=2412/20/gn(15dBm)

[Client Surv]
Model=MI 6
MAC=E4:46:DA:76:C0:3E
SSID="MTI-Group"
BSSID=64:d1:54:08:d7:4a
LinkRate=7Mbps
Rssi=-44dBm

[cAP Surv]
Client MAC=E4:46:DA:76:C0:3E
Channel/(TxPower)=2412/20/gn(15dBm)
RX/TX Rate=144.4Mbps-20MHz/2S/SGI/86.6Mbps-20MHz/2S/SGI
Rssi=-41dBm

[Rouming]
CAPs=()--->(-56)CAP_C1(-65)--->(-70)CAP_Office_2Ghz