Difference between revisions of "Device configuration for MupsBox"

From Mupssoft Wiki
Jump to navigation Jump to search
 
(56 intermediate revisions by the same user not shown)
Line 4: Line 4:
  
  
−
<h2>'''Vendor Configuration'''</h2>
 
 
<h2>'''Cisco - IOS v15'''</h2>Minimum* configuration:
 
<h2>'''Cisco - IOS v15'''</h2>Minimum* configuration:
  
Line 26: Line 25:
  
 
9.    Router(config)# '''ipv6 route''' ::/0 2001:db8:B40:4000::1
 
9.    Router(config)# '''ipv6 route''' ::/0 2001:db8:B40:4000::1
−
 
−
 
−
 
−
 
  
 
'''BASIC SSH CONFIGURATION - SUMMARY STEPS'''
 
'''BASIC SSH CONFIGURATION - SUMMARY STEPS'''
Line 47: Line 42:
 
16.    MBRouter(config-line)# '''transport input ssh'''
 
16.    MBRouter(config-line)# '''transport input ssh'''
  
−
MBRouter(config-line)# '''exit'''
+
17.    MBRouter(config-line)# '''exit'''
 +
 
 +
'''ADDITIONAL CONFIGURATION - SUMMARY STEPS'''
 +
 
 +
18.    MBRouter(config)# '''enable secret''' PassW0rd
 +
 
 +
19.    MBRouter(config)# '''service password-encryption'''
 +
 
 +
20.    MBRouter(config)# '''end'''
 +
 
 +
21.    MBRouter# '''copy running-config startup-config'''
 +
 
 +
 
 +
<p></p>
 +
 
 +
<h2>'''Cisco - IOS L2 v12'''</h2>Minimum* configuration:
 +
 
 +
'''BASIC ETHERNET CONFIGURATION - SUMMARY STEPS'''
 +
 
 +
1.    Switch> '''enable'''
 +
 
 +
2.    Switch# '''configure terminal'''
  
 +
3.    Switch(config)# '''interface vlan 1'''
 +
 +
4.    Switch(config-if)# '''ip adress''' 172.17.33.5 255.255.255.0
 +
 +
5.    Switch(config-if)# '''exit'''
 +
 +
6.    Switch(config)# '''ip default-gateway''' 172.17.33.1
 +
 +
'''BASIC SSH CONFIGURATION - SUMMARY STEPS'''
 +
 +
7.    Switch(config)# '''ip domain name''' domain.local
 +
 +
8.    Switch(config)# '''hostname''' MBSwitch
 +
 +
9.    MBSwitch(config)# '''crypto key generate rsa modulus 1024'''
 +
 +
10.    MBSwitch(config)# '''username''' ''root'' privilege 15 '''secret''' ''PassW0rd''
 +
 +
11.    MBSwitch(config)# '''aaa new-model'''
 +
 +
12.    MBSwitch(config)# '''line vty 0 4'''
 +
 +
13.    MBSwitch(config-line)# '''transport input ssh'''
 +
 +
14.    MBSwitch(config-line)# '''exit'''
  
  
 
'''ADDITIONAL CONFIGURATION - SUMMARY STEPS'''
 
'''ADDITIONAL CONFIGURATION - SUMMARY STEPS'''
  
−
17.    MBRouter(config)# '''enable secret''' PassW0rd  
+
15.    MBSwitch(config)# '''enable secret''' PassW0rd  
  
−
18.    MBRouter(config)# '''service password-encryption'''
+
16.    MBSwitch(config)# '''service password-encryption'''
  
−
19.    MBRouter(config)# '''end'''
+
17.    MBSwitch(config)# '''snmp-server community public RO'''
  
−
20.    MBRouter# '''copy running-config startup-config'''
+
18.    MBSwitch(config)# '''end'''
  
−
{| class="wikitable"
+
19.    MBSwitch# '''copy running-config startup-config'''
−
|+BASIC ETHERNET CONFIGURATION - DETAILED STEPS
 
−
!
 
−
!Comman or Action
 
−
!Purpose
 
−
|-
 
−
|'''Step 1'''
 
−
|'''enable'''
 
  
  
  
−
'''Example:'''
 
  
−
Router> enable
 
−
|Enables privileged EXEC mode.
 
  
−
* Enter your password if prompted.
 
−
|-
 
−
|'''Step 2'''
 
−
|'''configure terminal'''
 
  
 +
<h2>'''Cisco - ASA'''</h2>
 +
<p>Minimum* configuration. ASA Version 8.2(5):</p>
  
 +
'''BASIC ETHERNET CONFIGURATION - SUMMARY STEPS'''
  
−
'''Example:'''
+
1. ciscoasa> '''enable'''
  
−
Router# configure terminal
+
2. ciscoasa# '''configure termina'''l
−
|Enters global configuration mode.
 
−
|-
 
−
|'''Step 3'''
 
−
|'''interface gigabitethernet''' ''slot/port''
 
  
 +
3. (config)# '''enable password''' ''mtigroup''
  
−
'''Example:'''
+
4. ciscoasa(config)# '''hostname''' ''MBCiscoasa''
  
−
Router(config)# interface gigabitethernet 0/0
+
5. MBCiscoasa11(config)# '''interface''' ''gigabitEthernet 0/0''
−
|Specify the port adapter type and the location of the interface to be configured.
 
−
|-
 
−
|'''Step 4'''
 
−
|'''ip address''' ''ip subnetmask''
 
  
 +
6. MBCiscoasa11(config-if)# '''nameif inside'''
  
 +
7. MBCiscoasa11(config-if)# '''ip address''' ''172.18.11.11 255.255.255.0''
  
−
'''Example:'''
+
8. MBCiscoasa11(config-if)# '''no shutdown'''
  
−
Router(config-if)# ip address 10.9.90.201 255.255.255.0
+
9. MBCiscoasa11(config-if)# '''exit'''
−
|Sets the IPv4 address and subnet mask for the specified GE interface.
 
−
|-
 
−
|'''Step 5'''
 
−
|'''ipv6 address''' ip/prefix
 
  
 +
10. MBCiscoasa11(config)# '''route inside''' ''0.0.0.0 0.0.0.0 172.18.11.1''
  
−
'''Example:'''
 
  
−
Router(config-if)# ipv6 address 2001:db8:B40:4000::101/64
 
−
|Sets the IPv6 address and prefix for the specified GE interface
 
−
|-
 
−
|'''Step 6'''
 
−
|'''no shutdown'''
 
  
  
  
−
'''Example:'''
+
'''BASIC SSH CONFIGURATION - SUMMARY STEPS'''
 +
 +
11. MBCiscoasa11(config)# '''ssh''' ''172.31.10.0 255.255.255.0'' '''inside'''
  
−
Router(config-if)# no shutdown
+
12. MBCiscoasa11(config)# '''username''' ''mupsbox password PassW0rd privilege 15''
−
|Enables the GE interface, changing its state from administratively down to administratively up
 
−
|-
 
−
|'''Step 7'''
 
−
|'''exit'''
 
  
 +
13. MBCiscoasa11(config)# '''aaa authentication ssh console LOCAL'''
  
 +
14. MBCiscoasa11(config)# '''write'''
  
−
'''Example:'''
 
  
−
Router(config-if)# exit
 
−
|Exits configuration mode for the GE interface and returns to global configuration mode.
 
−
|-
 
−
|'''Step 8'''
 
−
|'''ip route 0.0.0.0 0.0.0.0''' ''gateway''
 
  
  
  
−
'''Example:'''
+
'''ADDITIONAL CONFIGURATION - SUMMARY STEPS'''
  
−
Router(config)# ip route 0.0.0.0 0.0.0.0 10.9.90.1
+
−
|Add route - default gateway for IPv4
 
−
|-
 
−
|'''Step 9'''
 
−
|'''ipv6 route''' '''::/0''' ''gateway''
 
  
 +
<h2>'''MikroTik'''</h2>
 +
<p>Minimum configuration for RouterOS V6 (with "zero" configuration)</p><p>'''BASIC ETHERNET CONFIGURATION - SUMMARY STEPS'''</p>
  
 +
1. [admin@MikroTik] > '''ip address add address='''''172.17.22.4/24'' '''interface='''''ether1''
  
−
'''Example:'''
+
2. [admin@MikroTik] > '''ip route add gateway='''''172.17.22.1''
  
−
Router(config)# ipv6 route ::/0 2001:db8:B40:4000::1
+
3. [admin@MikroTik] > '''ipv6 address add address='''2001:db8:b40:4002::4/64 '''interface='''ether1
−
|Add route - default gateway for IPv6
 
−
|}
 
  
 +
4. [admin@MikroTik] > '''ipv6 route add gateway='''2001:db8:b40:4002::1
  
−
{| class="wikitable"
+
5. [admin@MikroTik] > '''system identity set name='''MBMikroTik
−
|+BASIC SSH CONFIG - DETAILED STEPS
 
−
!
 
−
!Comman or Action
 
−
!Purpose
 
−
|-
 
−
|'''Step 10'''
 
−
|'''ip domain name''' ''domain name''
 
  
 +
6. [admin@MBMikroTik] > '''ip service disable telnet,ftp,www,api'''
  
 +
7. [admin@MBMikroTik] > '''user add name='''mupsbox '''password='''PassW0rd '''group='''full
  
−
'''Example:'''
+
8. [admin@MBMikroTik] > '''user remove admin'''<h2>'''DLink DGS'''</h2>
 +
<p>Minimum* configuration:</p>'''BASIC ETHERNET CONFIGURATION - SUMMARY STEPS'''
  
−
Router(config)# ip domain name domain.local
+
1. DGS-1210-28MP/ME:5# '''config ipif System ipaddress''' 172.17.22.2/24
−
|Specifies the default domain name that Cisco IOS software uses to complete unqualified host names
 
  
 +
2. DGS-1210-28MP/ME:5#'''config ipif System ipv6 ipv6address''' 2001:db8:b40:4002::2/64
  
−
|-
+
3. DGS-1210-28MP/ME:5# '''create iproute default''' 172.17.22.1
−
|'''Step 11'''
 
−
|'''hostname''' ''newhostname''
 
  
 +
4. DGS-1210-28MP/ME:5# '''create ipv6route default''' 2001:db8:b40:4002::1
  
−
'''Example:'''
+
5. DGS-1210-28MP/ME:5# '''enable ssh'''
  
−
Router(config)# hostname MBRouter
+
6. DGS-1210-28MP/ME:5# '''enable password encryption'''
−
|Specifies the name for the router.
 
−
|-
 
−
|'''Step 12'''
 
−
|'''crypto key generate rsa modulus 1024'''
 
  
 +
7. DGS-1210-28MP/ME:5# '''create account admin''' mupsbox
  
 +
8. DGS-1210-28MP/ME:5# '''save'''
  
−
'''Example:'''
 
  
−
MBRouter(config)# crypto key generate rsa modulus 1024
+
<h2>'''Huawei AR100'''</h2>
−
|To generate Rivest, Shamir, and Adelman (RSA) key pairs.
 
−
|-
 
−
|'''Step 13'''
 
−
|'''username''' ''root'' privilege 15 '''secret''' ''PassW0rd''
 
  
 +
Minimum* configuration:
  
 +
'''BASIC ETHERNET CONFIGURATION - SUMMARY STEPS'''
  
−
'''Example:'''
+
1. <Huawei> '''system-view'''
  
−
MBRouter(config)# username root privilege 15 secret PassW0rd
+
2. [Huawei] '''interface''' ''GigabitEthernet 0/0/0''
−
|Specifies the secret for the root.
 
−
|-
 
−
|'''Step 14'''
 
−
|'''aaa new-model'''
 
  
 +
3. [Huawei-GigabitEthernet0/0/0] '''undo portswitch'''
  
 +
4. [Huawei-GigabitEthernet0/0/0] '''ip address''' ''172.17.22.5 255.255.255.0''
  
−
'''Example:'''
+
5. [Huawei-GigabitEthernet0/0/0] '''quit'''
  
−
MBRouter(config)# aaa new-model
+
6. [Huawei] '''ip route-static''' '''0.0.0.0 0.0.0.0''' ''172.17.22.1''
−
|Enable AAA on router.
 
−
|-
 
−
|'''Step 15'''
 
−
|'''line vty 0 4'''
 
  
 +
7. [Huawei] '''save'''
  
  
−
'''Example:'''
 
  
−
MBRouter(config)# line vty 0 4
+
8. [Huawei] '''aaa'''
−
|Entering the configuration mode VTY is a virtual port and used to get Telnet or SSH access to the device.
 
−
|-
 
−
|'''Step 16'''
 
−
|'''transport input ssh'''
 
  
 +
9. [Huawei-aaa] '''local-user''' mupsbox '''password cipher''' PassW0rd
  
−
'''Example:'''
+
10. [Huawei-aaa] '''local-user''' '''admin privilege level 15'''
  
−
MBRouter(config-line)# transport input ssh
+
11. [Huawei-aaa] '''local-user admin service-type ssh'''
  
−
MBRouter(config-line)# exit
+
12. [Huawei-aaa] '''quit'''
−
|Accept only ssh via vty line.
 
−
|}
 
  
−
{| class="wikitable"
+
13. [Huawei] '''quit save'''
−
|+ADDITIONAL CONFIG - DETAILED STEPS
 
−
!
 
−
!Comman or Action
 
−
!Purpose
 
−
|-
 
−
|'''Step 17'''
 
−
|'''enable secre'''t ''PassW0rd''
 
  
 +
14. [Huawei] '''stelnet server enable'''
  
 +
15. [Huawei] '''save'''
  
−
'''Example:'''
+
<h2>'''Huawei Quidway 2000,3000,5000'''</h2>
  
−
MBRouter(config)# enable secret PassW0rd
+
Minimum* configuration:
−
|Defines a new password or changes an existing password for access to privileged EXEC mode.
 
  
 +
'''BASIC ETHERNET CONFIGURATION - SUMMARY STEPS'''
  
−
|-
+
1. <Quidway> '''system-view'''
−
|'''Step 18'''
 
−
|'''service password-encryption'''
 
  
 +
2. [Quidway]'''management-vlan 1'''
  
 +
3. [Quidway] '''interface Vlan-interface 1'''
  
−
'''Example:'''
+
4. [Quidway-Vlan-interface1] '''ip address''' ''172.17.55.7 255.255.255.0''
  
−
MBRouter(config)# service password-encryption
+
5. [[Quidway-Vlan-interface1] '''quit'''
−
|(Optional) Encrypts the password when the
 
−
password is defined or when the configuration
 
  
−
is written
+
6. [Quidway] '''ip route-static''' '''0.0.0.0 0.0.0.0''' ''172.17.22.1''
  
−
Encryption prevents the password from being readable in the configuration file.
+
7. [Quidway] '''save'''
−
|-
 
−
|'''Step 19'''
 
−
|'''end'''
 
  
  
  
−
'''Example:'''
+
'''BASIC SSH CONFIGURATION - SUMMARY STEPS'''
 +
 
 +
8. [Quidway] '''user-interface vty 0 4'''
 +
 
 +
9. [Quidway-ui-vty0-4] '''authentication-mode scheme'''
 +
 
 +
10. [Quidway-ui-vty0-4] '''protocol inbound ssh'''
 +
 
 +
11. [Quidway] '''local-user''' ''mupsbox''
 +
 
 +
12. [Quidway-luser-mupsbox] '''password simple''' ''PassW0rd''
  
−
MBRouter(config)# end
+
13. [Quidway-luser-mupsbox] '''service-type ssh'''
−
|Exits global configuration mode and returns to privileged EXEC mode.
 
−
|-
 
−
|'''Step 20'''
 
−
|'''copy running-config startup-config'''
 
  
 +
14. [Quidway] '''ssh user''' ''mupsbox'' '''authentication-type password'''
  
 +
15. [Quidway] '''rsa local-key-pair create'''
  
−
'''Example:'''
+
16. [Quidway] '''save'''
 +
  
−
MBrouter# copy running-config startup-config
 
−
|Saves the running configuration file as the startup configuration file.
 
−
|}
 
  
−
<p>MupsBox will sort the data and display only the values found. These data can be exported to Excel for further processing.</p>
 
  
 +
<h2>'''HP Procurve'''</h2>
  
−
<h2>'''Cisco - ASA'''</h2>
+
Minimum* configuration:
−
<p>Minimum* configuration. ASA Version 8.2(5):</p>
 
  
 
'''BASIC ETHERNET CONFIGURATION - SUMMARY STEPS'''
 
'''BASIC ETHERNET CONFIGURATION - SUMMARY STEPS'''
  
−
1.   Switch> '''enable'''
+
1. ProCurve Switch 2510-48# '''config'''
 +
 
 +
2. ProCurve Switch 2510-48(config)# '''hostname''' ''MBHP-2510''
  
−
2.   Switch# '''configure terminal'''
+
3. MBHP-2510(config)# '''vlan 1'''
  
−
3.   Switch(config)# '''interface gigabitethernet''' 0/0
+
4. MBHP-2510(vlan-1)# '''ip address''' ''172.17.44.2/24''
  
−
4.   Switch(config-if)# '''no switchport'''
+
5. MBHP-2510(vlan-1)# '''exit'''
  
−
5.   Switch(config-if)# '''ip adress''' 10.9.90.201 255.255.255.0
+
6. MBHP-2510(config)# '''ip default-gateway''' ''172.17.44.1''
  
−
6.    Switch(config-if)# '''exit'''
 
  
−
7.    Switch(config)# '''ip route''' 0.0.0.0 0.0.0.0 10.9.90.1
 
  
  
Line 318: Line 300:
 
'''BASIC SSH CONFIGURATION - SUMMARY STEPS'''
 
'''BASIC SSH CONFIGURATION - SUMMARY STEPS'''
  
−
8.     Router(config)# '''ip domain name''' domain.local  
+
7. MBHP-2510(config)# '''ip ssh'''
 +
 
 +
8. MBHP-2510(config)# '''crypto key generate ssh'''
 +
 
 +
9. MBHP-2510(config)# '''password manager'''
 +
 
 +
10. MBHP-2510(config)# '''aaa authentication login privilege-mode'''
 +
 
 +
11. MBHP-2510(config)# '''aaa authentication ssh login tacacs local'''
 +
 
 +
12. MBHP-2510(config)# '''aaa authentication ssh enable tacacs local'''
 +
 
 +
13. MBHP-2510(config)# '''write memory'''
 +
 
 +
 
 +
<h2>'''Juniper SRX'''</h2>
 +
 
 +
Minimum* configuration:
 +
 
 +
'''BASIC CONFIGURATION - SUMMARY STEPS'''
 +
 
 +
1. root@% '''cli'''
 +
 
 +
2. root> '''configure'''
  
−
9.     Router(config)# '''hostname''' MBRouter
+
3. root# '''set system host-name''' ''MBSRX100b''
  
−
10.   MBRouter(config)# '''crypto key generate rsa modulus 1024'''
+
4. root# <kbd>'''set system root-authentication plain-text-password'''</kbd>
  
−
11.    MBRouter(config)# '''username''' ''root'' privilege 15 '''secret''' ''PassW0rd''
+
''New password: <var>password</var>''
  
−
12.    MBRouter(config)# '''aaa new-model'''
+
''Retype new password: <var>password</var>''
  
−
13.   MBRouter(config)# '''line vty 0 4'''
+
5. root# <kbd>'''set system login user''' ''mupsbox'' '''class super-user authentication plain-text-password'''</kbd>
  
−
14.   MBRouter(config-line)# '''transport input ssh'''
+
6. root# '''commit'''
  
−
MBRouter(config-line)# '''exit'''
 
  
 +
 +
'''BASIC ETHERNET CONFIGURATION - SUMMARY STEPS'''
 +
 +
7. root@MBSRX100b#  '''set interfaces''' ''fe-0/0/0'' '''unit 0 family inet address''' <var>172.17.44.4/24</var>
 +
 +
8. root@MBSRX100b# '''set routing-options static route''' '''0.0.0.0/0 next-hop''' 172.17.44.1
 +
 +
9. root@MBSRX100b# '''delete security zones security-zone untrust interfaces''' ''fe-0/0/0''
 +
 +
10. root@MBSRX100b# '''set security zones security-zone internal interfaces''' ''fe-0/0/0'' '''host-inbound-traffic system-services ping'''
 +
 +
11. root@MBSRX100b# '''set security zones security-zone internal interfaces''' ''fe-0/0/0'' '''host-inbound-traffic system-services ssh'''
 +
 +
12. root@MBSRX100b# '''set system services ssh'''
 +
 +
13. root@MBSRX100b# '''set system services ssh root-login allow'''
 +
 +
12. root@MBSRX100b# '''commit'''
 +
 +
 +
<h2>'''Juniper ES'''</h2>
 +
 +
Minimum* configuration:
 +
 +
'''BASIC CONFIGURATION - SUMMARY STEPS'''
 +
 +
1. root@% '''cli'''
 +
 +
2. root> '''configure'''
 +
 +
3. root# '''set system host-name''' MBSRX100b
 +
 +
4. root# <kbd>'''set system root-authentication plain-text-password'''</kbd>
 +
 +
''New password: <var>password</var>''
 +
 +
''Retype new password: <var>password</var>''
 +
 +
5. root# <kbd>'''set system login user''' ''mupsbox'' '''class super-user authentication plain-text-password'''</kbd>
 +
 +
6. root# '''commit'''
 +
 +
 +
 +
'''BASIC ETHERNET CONFIGURATION - SUMMARY STEPS'''
 +
 +
7. root@MBSRX100b#  delete interface ge-0/0/0 unit 0 family ethernet-switching
 +
 +
8. root@MBSRX100b#  '''set interfaces''' ge-0/0/0 '''unit 0 family inet address''' <var>172.17.44.4/24</var>
 +
 +
9. root@MBSRX100b# '''set routing-options static route''' '''0.0.0.0/0 next-hop''' 172.17.44.1
 +
 +
10. root@MBSRX100b# '''set system services ssh'''
 +
 +
11. root@MBSRX100b# '''set system services ssh connection-limit 10 rate-limit 4'''
 +
 +
12. root@MBSRX100b# '''commit'''
 +
 +
 +
 +
<h2>'''Juniper SSG'''</h2>
 +
 +
Minimum* configuration:
 +
 +
'''BASIC  CONFIGURATION - SUMMARY STEPS'''
 +
 +
1. root-> '''set hostname''' ''MBSSG5''
 +
 +
2. MBSSG5-> '''set admin name''' ''mupsbox''
 +
 +
3. MBSSG5-> '''set admin password''' ''PassW0rd''
 +
 +
4. MBSSG5-> <kbd>'''set interface''' ''bgroup0'' '''ip 172.17.44.5/24'''</kbd>
 +
 +
5. MBSSG5-> '''set route''' ''0.0.0.0/0'' '''interface''' ''bgroup0'' '''gateway''' ''172.17.44.1''
 +
 +
6. MBSSG5-> '''save'''
 +
 +
7. MBSSG5-> '''set interface''' ''bgroup0'' '''manage ssh'''
 +
 +
8. MBSSG5-> '''set ssh enable'''
 +
 +
 +
 +
 +
<h2>'''Eltex  MES'''</h2>
 +
 +
Minimum* configuration:
 +
 +
'''BASIC  CONFIGURATION - SUMMARY STEPS'''
 +
 +
1. console> '''enable'''
 +
 +
2. console# '''configure'''
 +
 +
2. console(config)# '''interface vlan 1'''
 +
 +
3. console(config-if)# '''no ip address dhcp'''
 +
 +
4. console(config-if)# '''ip address''' ''172.17.55.4 255.255.255.0''
 +
 +
5. console(config-if)# '''exit'''
 +
 +
6. console(config)# '''ip route''' ''0.0.0.0 0.0.0.0 172.17.55.1''
 +
 +
7. console(config)# '''hostname''' ''MBEltexMES''
 +
 +
8. console(config)# '''ip ssh server'''
 +
 +
9. MBEltexMES(config)# '''username''' ''mupsbox'' ''privilege 15'' '''password''' ''PassW0rd!''
 +
 +
10. MBEltexMES(config)# '''enable password prpassword'''
  
  
−
'''ADDITIONAL CONFIGURATION - SUMMARY STEPS'''
 
  
−
15.    MBRouter(config)# '''enable secret''' PassW0rd
 
  
−
16.    MBRouter(config)# '''service password-encryption'''
+
<h2>'''Zyxel ZyWALL'''</h2>
  
−
17.    MBRouter(config)# '''end'''
+
Minimum* configuration:
  
−
18.    MBRouter# '''copy running-config startup-config'''
+
'''BASIC  CONFIGURATION - SUMMARY STEPS'''
  
−
{| class="wikitable"
+
1. Router> '''enable'''
−
|+BASIC ETHERNET CONFIGURATION - DETAILED STEPS
 
−
!
 
−
!Comman or Action
 
−
!Purpose
 
−
|-
 
−
|'''Step 1'''
 
−
|'''enable'''
 
  
 +
2. Router# '''configure terminal'''
  
 +
2. Router(config)# '''interface''' ''ge2''
  
−
'''Example:'''
+
3. Router(config-if-ge)# '''ip address''' ''172.17.44.7 255.255.255.0''
  
−
Router> enable
+
4. Router(config-if-ge)# '''ip gateway''' ''172.17.44.1''
−
|Enables privileged EXEC mode.
 
  
−
* Enter your password if prompted.
+
5. Router(config-if-ge)# '''no shutdown'''
−
|-
 
−
|'''Step 2'''
 
−
|'''configure terminal'''
 
  
 +
6. Router(config-if-ge)# '''exit'''
  
 +
7. Router(config)# '''username''' ''mupsbox'' '''password''' ''PassW0rd'' '''user-type''' ''admin''
  
−
'''Example:'''
 
  
−
Router# configure terminal
 
−
|Enters global configuration mode.
 
−
|-
 
−
|'''Step 3'''
 
−
|'''interface gigabitethernet''' ''slot/port''
 
  
  
−
'''Example:'''
+
<h2>'''Qtech QSW'''</h2>
  
−
Router(config)# interface gigabitethernet 0/0
+
Minimum* configuration:
−
|Specify the port adapter type and the location of the interface to be configured.
 
−
|-
 
−
|'''Step 4'''
 
−
|'''ip address''' ''ip subnetmask''
 
  
 +
'''BASIC  CONFIGURATION - SUMMARY STEPS'''
  
 +
1. QSW-2850-28T-AC> '''enable'''
  
−
'''Example:'''
+
2. QSW-2850-28T-AC# '''config terminal'''
  
−
Router(config-if)# ip address 10.9.90.201 255.255.255.0
+
2. QSW-2850-28T-AC(config)# '''interface vlan 1'''
−
|Sets the IP address and subnet mask for the specified GE interface.
 
−
|-
 
−
|'''Step 5'''
 
−
|'''no shutdown'''
 
  
 +
3. QSW-2850-28T-AC(config-if-vlan1)# '''ip address''' ''172.17.44.8 255.255.255.0''
  
 +
4. QSW-2850-28T-AC(config-if-vlan1)# '''exit'''
  
−
'''Example:'''
+
5. QSW-2850-28T-AC(config)# '''ip default-gateway''' ''172.17.44.1''
  
−
Router(config-if)# no shutdown
+
6. QSW-2850-28T-AC(config)# '''ssh-server enable'''
−
|Enables the GE interface, changing its state from administratively down to administratively up
 
−
|-
 
−
|'''Step 6'''
 
−
|'''exit'''
 
  
 +
7. QSW-2850-28T-AC(config)# '''username''' ''mupsbox'' privilege 15 '''password''' ''PassW0rd''
  
 +
8. QSW-2850-28T-AC(config)# '''exit'''
  
−
'''Example:'''
+
9. QSW-2850-28T-AC# '''copy running-config startup-config'''
  
−
Router(config-if)# exit
 
−
|Exits configuration mode for the GE interface and returns to global configuration mode.
 
−
|-
 
−
|'''Step 7'''
 
−
|'''ip route 0.0.0.0 0.0.0.0''' ''gateway''
 
  
  
  
−
'''Example:'''
+
<h2>'''Allied Telesis'''</h2>
  
−
Router(config)# ip route 0.0.0.0 0.0.0.0 10.9.90.1
+
Minimum* configuration:
−
|Add route - default gateway
 
−
|}
 
  
 +
'''BASIC  CONFIGURATION - SUMMARY STEPS'''
  
−
{| class="wikitable"
+
1. console# '''config'''
−
|+BASIC SSH CONFIG - DETAILED STEPS
 
−
!
 
−
!Comman or Action
 
−
!Purpose
 
−
|-
 
−
|'''Step 8'''
 
−
|'''ip domain name''' ''domain name''
 
  
 +
2. console(config)# '''interface vlan 1'''
  
 +
3. console(config-if)# '''ip address''' ''172.17.55.9 255.255.255.0''
  
−
'''Example:'''
+
4.console(config-if)# '''exit'''
  
−
Router(config)# ip domain name domain.local
+
5. console(config)# '''ip default-gateway''' ''172.17.55.1''
−
|Specifies the default domain name that Cisco IOS software uses to complete unqualified host names
 
  
 +
6. console(config)# '''username''' ''mupsbox'' '''password''' ''PassW0rd'' level 15
  
−
|-
+
7. console(config)# '''ip ssh server'''
−
|'''Step 9'''
 
−
|'''hostname''' ''newhostname''
 
  
 +
8. console(config)# '''crypto key generate rsa'''
  
−
'''Example:'''
 
  
−
Router(config)# hostname MBRouter
 
−
|Specifies the name for the router.
 
−
|-
 
−
|'''Step 10'''
 
−
|'''crypto key generate rsa modulus 1024'''
 
  
 +
<h2>'''Fortinet'''</h2>
  
 +
Minimum* configuration:
  
 +
'''BASIC  CONFIGURATION - SUMMARY STEPS'''
  
−
'''Example:'''
+
1. FortiGate-VM64-KVM # '''config system interface'''
  
−
MBRouter(config)# crypto key generate rsa modulus 1024
+
2. FortiGate-VM64-KVM (interface) # '''edit''' ''port1''
−
|To generate Rivest, Shamir, and Adelman (RSA) key pairs.
 
−
|-
 
−
|'''Step 11'''
 
−
|'''username''' ''root'' privilege 15 '''secret''' ''PassW0rd''
 
  
 +
2. FortiGate-VM64-KVM (port1) # '''set ip''' ''172.18.33.111 255.255.255.0''
  
 +
3 FortiGate-VM64-KVM (port1) # '''end'''
  
−
'''Example:'''
+
4. FortiGate-VM64-KVM # '''config router static'''
  
−
MBRouter(config)# username root privilege 15 secret PassW0rd
+
5. FortiGate-VM64-KVM (static) # '''edit''' ''0''
−
|Specifies the secret for the root.
 
−
|-
 
−
|'''Step 12'''
 
−
|'''aaa new-model'''
 
  
 +
6. FortiGate-VM64-KVM (0) # '''set gateway''' ''172.18.33.1''
  
 +
7. FortiGate-VM64-KVM (0) # '''set device''' ''port1''
  
−
'''Example:'''
+
8. FortiGate-VM64-KVM (0) # '''end'''
  
−
MBRouter(config)# aaa new-model
+
9. FortiGate-VM64-KVM # '''config system admin'''
−
|Enable AAA on router.
 
−
|-
 
−
|'''Step 13'''
 
−
|'''line vty 0 4'''
 
  
 +
10. FortiGate-VM64-KVM (admin) # '''edit''' ''mupsbox''
  
 +
11. FortiGate-VM64-KVM (mupsbox) # '''set accprofile''' ''"super_admin"''
  
−
'''Example:'''
+
12. FortiGate-VM64-KVM (mupsbox) # '''set vdom "root"'''
  
−
MBRouter(config)# line vty 0 4
+
13. FortiGate-VM64-KVM (mupsbox) # '''set password''' ''PassW0rd''
−
|Entering the configuration mode VTY is a virtual port and used to get Telnet or SSH access to the device.
 
−
|-
 
−
|'''Step 14'''
 
−
|'''transport input ssh'''
 
  
 +
14. FortiGate-VM64-KVM (mupsbox) # '''end'''
  
−
'''Example:'''
+
15. FortiGate-VM64-KVM # '''config system global'''
  
−
MBRouter(config-line)# transport input ssh
+
16. FortiGate-VM64-KVM (global) # '''set hostname''' ''FortiGateV''
  
−
MBRouter(config-line)# exit
+
17. FortiGate-VM64-KVM (global) # '''end'''
−
|Accept only ssh via vty line.
 
−
|}
 
  
−
{| class="wikitable"
+
18. FortiGateV # '''execute cfg save'''
−
|+ADDITIONAL CONFIG - DETAILED STEPS
 
−
!
 
−
!Comman or Action
 
−
!Purpose
 
−
|-
 
−
|'''Step 15'''
 
−
|'''enable secre'''t ''PassW0rd''
 
  
−
'''Example:'''
 
  
−
MBRouter(config)# enable secret PassW0rd
 
−
|Defines a new password or changes an existing password for access to privileged EXEC mode.
 
  
 +
<h2>'''Extreme Networks'''</h2>
  
−
|-
+
Minimum* configuration:
−
|'''Step 16'''
 
−
|'''service password-encryption'''
 
  
 +
'''BASIC  CONFIGURATION - SUMMARY STEPS'''
  
 +
1. * EXOS-VM.1 # '''create account admin''' ''mupsbox'' ''PassW0rd''
  
−
'''Example:'''
+
2. * EXOS-VM.6 # '''configure''' ''Mgmt'' '''ipaddress''' ''172.18.33.222 255.255.255.0''
  
−
MBRouter(config)# service password-encryption
+
3. * EXOS-VM.9 # '''configure iproute add default''' ''172.18.33.1'' '''vr''' ''VR-Mgmt''
−
|(Optional) Encrypts the password when the
 
−
password is defined or when the configuration
 
  
−
is written
+
4.* EXOS-VM.11 # '''enable ssh2'''
  
−
Encryption prevents the password from being readable in the configuration file.
+
5.* EXOS-VM.11 # '''save'''
−
|-
 
−
|'''Step 17'''
 
−
|'''end'''
 
  
  
  
−
'''Example:'''
 
  
−
MBRouter(config)# end
+
<h2>'''Check Point'''</h2>
−
|Exits global configuration mode and returns to privileged EXEC mode.
 
−
|-
 
−
|'''Step 18'''
 
−
|'''copy running-config startup-config'''
 
  
 +
Minimum* configuration:
  
 +
'''BASIC  CONFIGURATION - SUMMARY STEPS'''
  
−
Example:
+
1. gw-170003>set expert-password
  
−
MBrouter# copy running-config startup-config
+
2.gw-170003>expert
−
|Saves the running configuration file as the startup configuration file.
 
−
|}
 
  
 +
3. [Expert@gw-170003:0]# hostname MBCheckPoint
  
 +
4.[Expert@MBCheckPoint]# hostname MBCheckPoint
  
−
<h2>'''MikroTik'''</h2>
+
5.* EXOS-VM.11 # save
−
<p>Minimum configuration for RouterOS V6</p>
 
  
−
<h2>'''DLink DGS'''</h2>
 
−
<p>Minimum* configuration:</p>'''BASIC ETHERNET CONFIGURATION - SUMMARY STEPS'''
 
  
−
1. DGS-1210-28MP/ME:5# '''config ipif System ipaddress''' 172.17.22.2/24
 
  
−
2. DGS-1210-28MP/ME:5#'''config ipif System ipv6 ipv6address''' 2001:db8:b40:4002::2/64
 
  
−
2. DGS-1210-28MP/ME:5# '''create iproute default''' 172.17.22.1
 
  
−
3. DGS-1210-28MP/ME:5# '''create ipv6route default''' 2001:db8:b40:4002::1
 
  
  
 +
<br><br><div id="BackToTop" class="noprint" style="background-color:#DDEFDD; position:fixed;
  
−
9. Router(config)# '''save'''<h2>'''Huawei'''</h2>
 
−
<p>To filter by prefix, click the down arrow in the prefix field, as shown in the figure below and select the prefix or prefixes by which you need to filter the data.</p>
 
−
[[File:syslog-prefix.png|Syslog Filter by Prefix]]
 
−
<p>To filter by device and topic, do the same.</p>
 
  
  
−
[[File:custom-filter.png|Custom Filter]]<br><br>
 
−
[[File:custom-filter2.png|Custom Filter]]
 
−
<div id="BackToTop"  class="noprint" style="background-color:#DDEFDD; position:fixed;
 
 
  bottom:32px; left:2%; z-index:9999; padding:0; margin:0;"><span style="color:blue;
 
  bottom:32px; left:2%; z-index:9999; padding:0; margin:0;"><span style="color:blue;
 
  font-size:8pt; font-face:verdana,sans-serif;  border:0.2em outset #ceebf7;
 
  font-size:8pt; font-face:verdana,sans-serif;  border:0.2em outset #ceebf7;
 
  padding:0.1em; font-weight:bolder; -moz-border-radius:8px; ">
 
  padding:0.1em; font-weight:bolder; -moz-border-radius:8px; ">
−
[[#top| Back to the Top ]]</span></div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div>
+
[[#top| Back to the Top]]</span></div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div>
 +
<div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div>
 +
<div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div><div id="turnkey-credit"> <div style="clear: both;"> [https://www.turnkeylinux.org/mediawiki MediaWiki Appliance] - Powered by [https://www.turnkeylinux.org TurnKey Linux] </div> </div>

Latest revision as of 03:45, 22 June 2021

Device Configuration

Introduction

This section is not a tutorial on configuration different manufacturers. Here you will find the minimum settings in the CLI (for access from MUPSBOX to devices).


Cisco - IOS v15

Minimum* configuration:

BASIC ETHERNET CONFIGURATION - SUMMARY STEPS

1. Router> enable

2. Router# configure terminal

3. Router(config)# interface gigabitethernet 0/0

4. Router(config-if)# ip adress 10.9.90.201 255.255.255.0

5. Router(config-if)# ipv6 address 2001:db8:B40:4000::101/64

6. Router(config-if)# no shutdown

7. Router(config-if)# exit

8. Router(config)# ip route 0.0.0.0 0.0.0.0 10.9.90.1

9. Router(config)# ipv6 route ::/0 2001:db8:B40:4000::1

BASIC SSH CONFIGURATION - SUMMARY STEPS

10. Router(config)# ip domain name domain.local

11. Router(config)# hostname MBRouter

12. MBRouter(config)# crypto key generate rsa modulus 1024

13. MBRouter(config)# username root privilege 15 secret PassW0rd

14. MBRouter(config)# aaa new-model

15. MBRouter(config)# line vty 0 4

16. MBRouter(config-line)# transport input ssh

17. MBRouter(config-line)# exit

ADDITIONAL CONFIGURATION - SUMMARY STEPS

18. MBRouter(config)# enable secret PassW0rd

19. MBRouter(config)# service password-encryption

20. MBRouter(config)# end

21. MBRouter# copy running-config startup-config


Cisco - IOS L2 v12

Minimum* configuration:

BASIC ETHERNET CONFIGURATION - SUMMARY STEPS

1. Switch> enable

2. Switch# configure terminal

3. Switch(config)# interface vlan 1

4. Switch(config-if)# ip adress 172.17.33.5 255.255.255.0

5. Switch(config-if)# exit

6. Switch(config)# ip default-gateway 172.17.33.1

BASIC SSH CONFIGURATION - SUMMARY STEPS

7. Switch(config)# ip domain name domain.local

8. Switch(config)# hostname MBSwitch

9. MBSwitch(config)# crypto key generate rsa modulus 1024

10. MBSwitch(config)# username root privilege 15 secret PassW0rd

11. MBSwitch(config)# aaa new-model

12. MBSwitch(config)# line vty 0 4

13. MBSwitch(config-line)# transport input ssh

14. MBSwitch(config-line)# exit


ADDITIONAL CONFIGURATION - SUMMARY STEPS

15. MBSwitch(config)# enable secret PassW0rd

16. MBSwitch(config)# service password-encryption

17. MBSwitch(config)# snmp-server community public RO

18. MBSwitch(config)# end

19. MBSwitch# copy running-config startup-config




Cisco - ASA

Minimum* configuration. ASA Version 8.2(5):

BASIC ETHERNET CONFIGURATION - SUMMARY STEPS

1. ciscoasa> enable

2. ciscoasa# configure terminal

3. (config)# enable password mtigroup

4. ciscoasa(config)# hostname MBCiscoasa

5. MBCiscoasa11(config)# interface gigabitEthernet 0/0

6. MBCiscoasa11(config-if)# nameif inside

7. MBCiscoasa11(config-if)# ip address 172.18.11.11 255.255.255.0

8. MBCiscoasa11(config-if)# no shutdown

9. MBCiscoasa11(config-if)# exit

10. MBCiscoasa11(config)# route inside 0.0.0.0 0.0.0.0 172.18.11.1



BASIC SSH CONFIGURATION - SUMMARY STEPS

11. MBCiscoasa11(config)# ssh 172.31.10.0 255.255.255.0 inside

12. MBCiscoasa11(config)# username mupsbox password PassW0rd privilege 15

13. MBCiscoasa11(config)# aaa authentication ssh console LOCAL

14. MBCiscoasa11(config)# write



ADDITIONAL CONFIGURATION - SUMMARY STEPS


MikroTik

Minimum configuration for RouterOS V6 (with "zero" configuration)

BASIC ETHERNET CONFIGURATION - SUMMARY STEPS

1. [admin@MikroTik] > ip address add address=172.17.22.4/24 interface=ether1

2. [admin@MikroTik] > ip route add gateway=172.17.22.1

3. [admin@MikroTik] > ipv6 address add address=2001:db8:b40:4002::4/64 interface=ether1

4. [admin@MikroTik] > ipv6 route add gateway=2001:db8:b40:4002::1

5. [admin@MikroTik] > system identity set name=MBMikroTik

6. [admin@MBMikroTik] > ip service disable telnet,ftp,www,api

7. [admin@MBMikroTik] > user add name=mupsbox password=PassW0rd group=full

8. [admin@MBMikroTik] > user remove admin

DLink DGS

Minimum* configuration:

BASIC ETHERNET CONFIGURATION - SUMMARY STEPS

1. DGS-1210-28MP/ME:5# config ipif System ipaddress 172.17.22.2/24

2. DGS-1210-28MP/ME:5#config ipif System ipv6 ipv6address 2001:db8:b40:4002::2/64

3. DGS-1210-28MP/ME:5# create iproute default 172.17.22.1

4. DGS-1210-28MP/ME:5# create ipv6route default 2001:db8:b40:4002::1

5. DGS-1210-28MP/ME:5# enable ssh

6. DGS-1210-28MP/ME:5# enable password encryption

7. DGS-1210-28MP/ME:5# create account admin mupsbox

8. DGS-1210-28MP/ME:5# save


Huawei AR100

Minimum* configuration:

BASIC ETHERNET CONFIGURATION - SUMMARY STEPS

1. <Huawei> system-view

2. [Huawei] interface GigabitEthernet 0/0/0

3. [Huawei-GigabitEthernet0/0/0] undo portswitch

4. [Huawei-GigabitEthernet0/0/0] ip address 172.17.22.5 255.255.255.0

5. [Huawei-GigabitEthernet0/0/0] quit

6. [Huawei] ip route-static 0.0.0.0 0.0.0.0 172.17.22.1

7. [Huawei] save


8. [Huawei] aaa

9. [Huawei-aaa] local-user mupsbox password cipher PassW0rd

10. [Huawei-aaa] local-user admin privilege level 15

11. [Huawei-aaa] local-user admin service-type ssh

12. [Huawei-aaa] quit

13. [Huawei] quit save

14. [Huawei] stelnet server enable

15. [Huawei] save

Huawei Quidway 2000,3000,5000

Minimum* configuration:

BASIC ETHERNET CONFIGURATION - SUMMARY STEPS

1. <Quidway> system-view

2. [Quidway]management-vlan 1

3. [Quidway] interface Vlan-interface 1

4. [Quidway-Vlan-interface1] ip address 172.17.55.7 255.255.255.0

5. [[Quidway-Vlan-interface1] quit

6. [Quidway] ip route-static 0.0.0.0 0.0.0.0 172.17.22.1

7. [Quidway] save


BASIC SSH CONFIGURATION - SUMMARY STEPS

8. [Quidway] user-interface vty 0 4

9. [Quidway-ui-vty0-4] authentication-mode scheme

10. [Quidway-ui-vty0-4] protocol inbound ssh

11. [Quidway] local-user mupsbox

12. [Quidway-luser-mupsbox] password simple PassW0rd

13. [Quidway-luser-mupsbox] service-type ssh

14. [Quidway] ssh user mupsbox authentication-type password

15. [Quidway] rsa local-key-pair create

16. [Quidway] save



HP Procurve

Minimum* configuration:

BASIC ETHERNET CONFIGURATION - SUMMARY STEPS

1. ProCurve Switch 2510-48# config

2. ProCurve Switch 2510-48(config)# hostname MBHP-2510

3. MBHP-2510(config)# vlan 1

4. MBHP-2510(vlan-1)# ip address 172.17.44.2/24

5. MBHP-2510(vlan-1)# exit

6. MBHP-2510(config)# ip default-gateway 172.17.44.1



BASIC SSH CONFIGURATION - SUMMARY STEPS

7. MBHP-2510(config)# ip ssh

8. MBHP-2510(config)# crypto key generate ssh

9. MBHP-2510(config)# password manager

10. MBHP-2510(config)# aaa authentication login privilege-mode

11. MBHP-2510(config)# aaa authentication ssh login tacacs local

12. MBHP-2510(config)# aaa authentication ssh enable tacacs local

13. MBHP-2510(config)# write memory


Juniper SRX

Minimum* configuration:

BASIC CONFIGURATION - SUMMARY STEPS

1. root@% cli

2. root> configure

3. root# set system host-name MBSRX100b

4. root# set system root-authentication plain-text-password

New password: password

Retype new password: password

5. root# set system login user mupsbox class super-user authentication plain-text-password

6. root# commit


BASIC ETHERNET CONFIGURATION - SUMMARY STEPS

7. root@MBSRX100b# set interfaces fe-0/0/0 unit 0 family inet address 172.17.44.4/24

8. root@MBSRX100b# set routing-options static route 0.0.0.0/0 next-hop 172.17.44.1

9. root@MBSRX100b# delete security zones security-zone untrust interfaces fe-0/0/0

10. root@MBSRX100b# set security zones security-zone internal interfaces fe-0/0/0 host-inbound-traffic system-services ping

11. root@MBSRX100b# set security zones security-zone internal interfaces fe-0/0/0 host-inbound-traffic system-services ssh

12. root@MBSRX100b# set system services ssh

13. root@MBSRX100b# set system services ssh root-login allow

12. root@MBSRX100b# commit


Juniper ES

Minimum* configuration:

BASIC CONFIGURATION - SUMMARY STEPS

1. root@% cli

2. root> configure

3. root# set system host-name MBSRX100b

4. root# set system root-authentication plain-text-password

New password: password

Retype new password: password

5. root# set system login user mupsbox class super-user authentication plain-text-password

6. root# commit


BASIC ETHERNET CONFIGURATION - SUMMARY STEPS

7. root@MBSRX100b# delete interface ge-0/0/0 unit 0 family ethernet-switching

8. root@MBSRX100b# set interfaces ge-0/0/0 unit 0 family inet address 172.17.44.4/24

9. root@MBSRX100b# set routing-options static route 0.0.0.0/0 next-hop 172.17.44.1

10. root@MBSRX100b# set system services ssh

11. root@MBSRX100b# set system services ssh connection-limit 10 rate-limit 4

12. root@MBSRX100b# commit


Juniper SSG

Minimum* configuration:

BASIC CONFIGURATION - SUMMARY STEPS

1. root-> set hostname MBSSG5

2. MBSSG5-> set admin name mupsbox

3. MBSSG5-> set admin password PassW0rd

4. MBSSG5-> set interface bgroup0 ip 172.17.44.5/24

5. MBSSG5-> set route 0.0.0.0/0 interface bgroup0 gateway 172.17.44.1

6. MBSSG5-> save

7. MBSSG5-> set interface bgroup0 manage ssh

8. MBSSG5-> set ssh enable



Eltex MES

Minimum* configuration:

BASIC CONFIGURATION - SUMMARY STEPS

1. console> enable

2. console# configure

2. console(config)# interface vlan 1

3. console(config-if)# no ip address dhcp

4. console(config-if)# ip address 172.17.55.4 255.255.255.0

5. console(config-if)# exit

6. console(config)# ip route 0.0.0.0 0.0.0.0 172.17.55.1

7. console(config)# hostname MBEltexMES

8. console(config)# ip ssh server

9. MBEltexMES(config)# username mupsbox privilege 15 password PassW0rd!

10. MBEltexMES(config)# enable password prpassword



Zyxel ZyWALL

Minimum* configuration:

BASIC CONFIGURATION - SUMMARY STEPS

1. Router> enable

2. Router# configure terminal

2. Router(config)# interface ge2

3. Router(config-if-ge)# ip address 172.17.44.7 255.255.255.0

4. Router(config-if-ge)# ip gateway 172.17.44.1

5. Router(config-if-ge)# no shutdown

6. Router(config-if-ge)# exit

7. Router(config)# username mupsbox password PassW0rd user-type admin



Qtech QSW

Minimum* configuration:

BASIC CONFIGURATION - SUMMARY STEPS

1. QSW-2850-28T-AC> enable

2. QSW-2850-28T-AC# config terminal

2. QSW-2850-28T-AC(config)# interface vlan 1

3. QSW-2850-28T-AC(config-if-vlan1)# ip address 172.17.44.8 255.255.255.0

4. QSW-2850-28T-AC(config-if-vlan1)# exit

5. QSW-2850-28T-AC(config)# ip default-gateway 172.17.44.1

6. QSW-2850-28T-AC(config)# ssh-server enable

7. QSW-2850-28T-AC(config)# username mupsbox privilege 15 password PassW0rd

8. QSW-2850-28T-AC(config)# exit

9. QSW-2850-28T-AC# copy running-config startup-config



Allied Telesis

Minimum* configuration:

BASIC CONFIGURATION - SUMMARY STEPS

1. console# config

2. console(config)# interface vlan 1

3. console(config-if)# ip address 172.17.55.9 255.255.255.0

4.console(config-if)# exit

5. console(config)# ip default-gateway 172.17.55.1

6. console(config)# username mupsbox password PassW0rd level 15

7. console(config)# ip ssh server

8. console(config)# crypto key generate rsa


Fortinet

Minimum* configuration:

BASIC CONFIGURATION - SUMMARY STEPS

1. FortiGate-VM64-KVM # config system interface

2. FortiGate-VM64-KVM (interface) # edit port1

2. FortiGate-VM64-KVM (port1) # set ip 172.18.33.111 255.255.255.0

3 FortiGate-VM64-KVM (port1) # end

4. FortiGate-VM64-KVM # config router static

5. FortiGate-VM64-KVM (static) # edit 0

6. FortiGate-VM64-KVM (0) # set gateway 172.18.33.1

7. FortiGate-VM64-KVM (0) # set device port1

8. FortiGate-VM64-KVM (0) # end

9. FortiGate-VM64-KVM # config system admin

10. FortiGate-VM64-KVM (admin) # edit mupsbox

11. FortiGate-VM64-KVM (mupsbox) # set accprofile "super_admin"

12. FortiGate-VM64-KVM (mupsbox) # set vdom "root"

13. FortiGate-VM64-KVM (mupsbox) # set password PassW0rd

14. FortiGate-VM64-KVM (mupsbox) # end

15. FortiGate-VM64-KVM # config system global

16. FortiGate-VM64-KVM (global) # set hostname FortiGateV

17. FortiGate-VM64-KVM (global) # end

18. FortiGateV # execute cfg save


Extreme Networks

Minimum* configuration:

BASIC CONFIGURATION - SUMMARY STEPS

1. * EXOS-VM.1 # create account admin mupsbox PassW0rd

2. * EXOS-VM.6 # configure Mgmt ipaddress 172.18.33.222 255.255.255.0

3. * EXOS-VM.9 # configure iproute add default 172.18.33.1 vr VR-Mgmt

4.* EXOS-VM.11 # enable ssh2

5.* EXOS-VM.11 # save



Check Point

Minimum* configuration:

BASIC CONFIGURATION - SUMMARY STEPS

1. gw-170003>set expert-password

2.gw-170003>expert

3. [Expert@gw-170003:0]# hostname MBCheckPoint

4.[Expert@MBCheckPoint]# hostname MBCheckPoint

5.* EXOS-VM.11 # save






Retrieved from "https://wiki.mupssoft.com/index.php?title=Device_configuration_for_MupsBox&oldid=1084"